krunch

👋 Hello! I usually go by krunch /krʌntʃ/ on the Internet, though not many people know my real name. I like a lot of stuff, and you will probably learn about what they are below.

Reach out: hello@krunchie.tech or @krunchiekrunch._. on Discord.
Find me:   GitHub Discord (Preferred)



Discord RPC via lanyard

On this page:

Projects

I have worked on a few projects and these are one ones that I think are worthy of a mention here.

Photography!

I’m not very good at creative stuff, but I would say I am decent at taking photos.

There are many things I like to photograph, mainly landscape, cities, animals, and the moon!

I’ll showcase some here eventually…

PlaceholderPlaceholderPlaceholderPlaceholder

Homelab

At home, I have a micro datacenter that I self host various applications on, the main PC runs Proxmox VE, which have a few containers such as

This system is mainly assembled with parts I have laying around so it’s not the best, but its enough for Proxmox VE

I also have a Raspberry Pi 3B, I run services like meshtasticd (off-grid, mesh communication network), and other ADS-B related applications such as fr24feed, adsbexchange feeder, tar1090, graphs1090, etc…)

Again, here are the specifications:

I’ll add a network diagram here some day…

Aviation!

I think aviation is pretty cool. The idea of being able to travel freely, far far away always interested me, in my free time, I like to fly around the world in MSFS2020.

Electronics

I’m not very good at coding, but I am pretty good at making electronics, I love designing circuit boards and assembling them, it’s just like LEGO but more advanced :p

I’m also pretty good at soldering, I’d say most of my joints are perfect!

I’ve also soldered a few 01005 resistors which in my opinion is quite impressive, for reference, each resistor is about 0.2mm wide, which is just about the size of a grain of fine table salt!

Radio and RF

I have been interested in RF for quite a while, I remeber when I bought a software-defined radio dongle and started tracking aircrafts via ADS-B and Mode-S, I had so much fun just learning about radio frequencies. This wasn’t something I thought I would be interested in but I am so glad I discovered it.

I also learned about receving NOAA satellite images, particularlly the NOAA-15/18/19 satellites that transmits APT on 137MHz, I remember using a handheld radio and just recording the beeps of the APT signal, then later decoding them on SatDump.

I didn’t get many good quality images from it before they were decomissioned but here’s my favourite one.

A image of Europe received from NOAA APT transmission

Music!

When I’m not taking photos, or flying, or tinkering, I like to listen to music (or while doing those things), I listen to many things across multiple genres!

Here’s a collection of music I quite like:

Other things!

I don’t really like doing game-sports, although I do like hiking, rock climbing, and much more.

I quite like cooking, or things that I can see the results of my work!

Over the course of my life, I’ve set foot on 10 countries, those being (in alphabetical order): China, France, Germany, Greece, Italy, Japan, Qatar, Taiwan, United Kingdom, and Vatican City.

Btw, most if not all of my projects are open source on GitHub, because where else would I store them :>

And finally, a few words about my computer: It’s a PC that I built not long ago (late 2025), and mainly comprise of used parts which helped to bring the cost down dramatically. PCPartPicker

And as always, feel free to shoot me an email or direct message me anytime, anywhere, and for any reason :) (Please read nohello and dontasktoask first) Byeeeeeeeeeee.

This site is open sourced, source code can be viewed on GitHub, PRs welcome!

Licensed under MIT License, originally designed by Lexi Mattick 😎