esp-hal

esp32s3 esp-hal no_std Embassy Template with Wifi, Web Server, http client and OTA

Dinosaur Game written in Rust for the ESP32 with an OLED display, using the Embassy framework.

ESP32 DevKit v1 home sensor (bme280, scd30, sds011) with InfluxDB, Telegraf and Mosquitto using MQTT over TLS and over-the-air firmware upgrade (OTA)

Bare Metal (no_std) ESP32-S3-BOX-3 Voice Assistant & Smart Speaker with neat features like a web UI, API, etc. Written in Rust (no esp-idf)

Rust no_std/embassy firmware for an ESP32 animatronic Cult of the Lamb crown prop: GC9A01 round display, dual-mic FFT sound-direction detection, and a WiFi captive-portal config UI

Русские переводы книг по embedded Rust: The Embedded Rust Book, Discovery для micro:bit v2, impl Rust для RP2350 и ESP32, курсы no_std и std, Comprehensive Rust. Сайт собирается mdBook, есть EPUB и упражнения.

no_std Rust neural network inference engine for ESP32 microcontrollers. Compile-time model embedding, INT8 quantization, SIMD-optimized kernels, zero heap allocation

esp32c6-zero mqtt e-ink demo

Run the Rust smoltcp stack as an ESP-IDF component with BSD sockets compatibility for high-performance, memory-safe networking on ESP32 hardware.

A desk instrument showing how much of your Claude subscription you have spent: Rust/Slint firmware for the Waveshare ESP32-S3-Touch-AMOLED-2.16, plus a BLE host daemon

cargo-generate templates for mirui — SDL desktop, ESP32-C3 embedded, multi-target Cargo workspace, and a wasm placeholder

Fun project! Hardware based TOTP gadget using a ESP32

Some test application for the lilygo t5 e-paper

Educational project demonstrating embedded Rust on ESP32-C3 with a full-stack telemetry system

A Rust-based embedded environment logger using the ESP32-S3 on the M5Stack CoreS3-SE

Using an ESP32 C3 to send sensor data from my garden to my Home Assistant server over MQTT

LED matrix powered by ESP32S3 running Rust. Heavily vibe coded.

Rust-native SDK for the Arduino Nesso N1 (ESP32-C6) — display, touch, IMU, Wi-Fi, audio, lora and power management.

On-device audio classifier for theESP32-S3 that detects whether an electric pump is running. Captures stereo I2S audio, runs a quantised INT8 CNN on mel-spectrograms in ~31 ms per 1-second window, and reports ON/OFF state over TCP or MQTT. Includes Rust firmware, host-side receivers, PyTorch training pipeline, and a CT-clamp PCB

no_std Rust OV5647 MIPI CSI-2 driver for ESP32-P4 pre-v3 (chip rev 1.3): SCCB, CSI/D-PHY/ISP/DW-GDMA, CRC-32-verified capture to host